Designed specifically for golf, accurate measurement of the distance between the players and the hole

A feature
This is a new invention with a precise measurement of optical and digital technology from the observation of golf equipment, this is a very safe distance testing equipment, safety and without any form of energy radiation, measuring the distance events in the human body without any damage and destruction.

22 kinds of functions
1.GREEN MODE (green function)
This feature is especially designed for the golfer, you can easily get the distance between your hole.
2.GENERAL MODE (normal function)
This feature is suitable for normal conditions, first of all you to target the high input into, you can measure you and the distance between the target.

Name the three parts
1,. Switch / adjustment button
2. Function keys
3. Cast into parts of the battery
4. Peephole
5. Objectives
The main parameters indicators:
Lens: 28mm;
Eyepiece: 16mm;
Resolution: 13 ";
Magnification: 7 times;
Longest test distance: 250 yards (one yard = 0.914 meters)
Angle: 7.8 °;
Power supply: two cr2032 button battery
Size: 90mm × 50mm × 38mm;

4 Use
1. By switch / button to adjust the instrument starts, security features will go directly to the lawn.
2. Used to play golf:
To code for the unit of scale height (2.6 yards) is entered into the.
(1) the bottom line of the screen horizontal alignment with the lawn.
(2) the switch / button to adjust the position of the scan line up transferred to the top of golf flagpoles.
(3) number will be out of the top of the screen, indicating the distance between you and the hole.
3. For use in measuring the distance between the special target
Press the function key instrument in the general functional status, the screen will display three-digit number and a decimal point.
If you want to check the distance between you and your target, make it a high degree of input.
(1) The switch / key to input a general function to adjust the screen will display three digits and a decimal number.
(2) press the function key to move to 10 digits, then press the switch / adjust the key input number range is 0 to 9.
(3) Repeat the above steps, you set the number and the decimal point a few.
(4) press the function key input for more than the end of the process.
(5) based on your height, the screen will show you the minimum distance can be measured.
(6) to screen and target the most bottom-line minimum line alignment.
(7), the switch / button to adjust the position of scanning lines transferred to target up top.
(8) number will appear in the top of the screen, indicating the distance between you and the target.

5 Notes
1. The distance and have shown a high degree of input units is the same.
2. Action ended 60 seconds after the power supply automatically switches.
3. Attention! Please do not use this product visually observe the sun, so your eyes will cause permanent damage